{"title":"Jeep XJ Cherokee Parts","description":"","products":[{"product_id":"wj-swap-7075-aluminum-steering-links","title":"WJ Swap 7075 Aluminum Steering Links","description":"Tie Rod \u0026amp; Drag Link Set for WJ steering swap If you're doing the WJ Steering and brake swap on your XJ, TJ, or ZJ and simply need the Tie Rod and Drag Link to complete your steering, this is what you need. This kit includes Drag Link and Tie Rod made from solid machined 7075 Aluminum, 2 offset GM 1-Ton Tie Rod ends for the tie rod, and the 2 high angle TREs for the Drag link.  These are the same steering linkages we include in our High Roller Steering \u0026amp; Brake Kit. Please note: This kit is intended for use with 17\" wheels. Some 16\" wheels may fit with proper backspacing. 15\" wheels are not recommended.","brand":"StinkyFab","offers":[{"title":"Default Title","offer_id":31646861295752,"sku":"WJ-Steering","price":529.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0297\/8650\/5352\/products\/108_4803-r_1__04778.jpg?v=1578182618"},{"product_id":"tapered-knuckle-inserts","title":"Tapered Knuckle Inserts","description":"1-ton tapered inserts These inserts allow you to easily re-taper your knuckles for GM 1-ton style tie rod ends without special tools. Simply drill the stock steering arm out to 7\/8\" and slide the insert into place. Sold as a pair or individually (select above).","brand":"Barnes","offers":[{"title":"Pair","offer_id":44066240364780,"sku":"Knuckle Inserts Pair","price":20.0,"currency_code":"USD","in_stock":false},{"title":"Individual","offer_id":44066240397548,"sku":"Individual Insert","price":12.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0297\/8650\/5352\/products\/108_4553-s__12939.jpg?v=1578182621"},{"product_id":"sfr-trail-proof-transmission-mount-jeep-xj-cherokee","title":"SFR Trail Proof Transmission Mount Jeep XJ Cherokee","description":"\u003ch3\u003e\u003cspan style=\"color: #e6fc2f;\"\u003e\u003cstrong\u003e.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003eThis mount replaces Anchor Part #2625, 3188 and 2570, which covers all Cherokee models except for Peugeot 5speeds. Replaces BOTH offset and centered mounts\u003c\/p\u003e\n\u003cp\u003eThe stock Cherokee Transmission mount was never designed to handle serious abuse. It's weak and often sags out of position which puts excess load on the motor mounts causing them to fail prematurely as well. Our heavy duty mount solves all that. It's constructed from 3\/16\" thick steel and the bushing is housed in a 1\/4\" thick shell. Our mount uses our exclusive SuperSoft bushings for vibration absorption. The modular design of our latest generation transmission mount allows it to replace both the centered and offset stock mounts.  These pair perfectly with our heavy duty motor mounts. Keep your drivetrain where it belongs, and stop repeatedly replacing the stock mounts that just aren't up to the job.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ffff00;\"\u003e\u003cstrong\u003eAdd a set of our \u003ca style=\"color: #ffff00;\" href=\"https:\/\/www.stinkyfab.com\/collections\/xj-drivetrain\/products\/sfr-trail-proof-motor-mounts-stock-height-jeep-4-0l\"\u003eMotor Mounts\u003c\/a\u003e and save 10% with code \"MMBundle2\"*\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003cspan\u003e*may not be combined with other sale offers\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eNOTE: Our SuperSoft Bushings are now Black instead of Red. See \u003ca href=\"https:\/\/www.stinkyfab.com\/blogs\/news\/new-color-same-bushings\"\u003eBlog Post\u003c\/a\u003e for details. \u003c\/span\u003e\u003c\/p\u003e","brand":"StinkyFab","offers":[{"title":"Default Title","offer_id":31646862475400,"sku":"XJT","price":115.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0297\/8650\/5352\/files\/20241021-110847.jpg?v=1729658067"},{"product_id":"sfr-trail-proof-motor-mounts-stock-height-jeep-4-0l","title":"SFR Trail Proof Motor Mounts  Jeep 4.0L","description":"\u003ch3\u003e\u003cbr\u003e\u003c\/h3\u003e\n\u003ch2\u003e\u003cspan style=\"color: rgb(128, 255, 0);\"\u003e\u003cstrong\u003e.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eThis is the first thing every Jeep owner needs! SFR heavy duty motor mounts fit all years of Jeep YJ, TJ, LJ, XJ, and MJ vehicles with the 4.0L 6 cylinder engine. We designed these with strength and durability in mind, but didn't forget about the price tag. These mounts are made from 3\/16\" thick steel, with a 1\/4\" thick shell for the bushing.They come with our exclusive SFR SuperSoft bushings for the most vibration absorption possible.\u003c\/p\u003e\n\u003cp\u003eMounting hardware is included. Sold in pairs.  \u003c\/p\u003e\n\u003cp\u003eThese mounts pair perfectly with our \u003ca href=\"https:\/\/stinkyfab.myshopify.com\/collections\/xj-drivetrain\/products\/sfr-trail-proof-engine-mounting-plates-jeep-xj-87-01-yj-87-95-tj-97-99\"\u003eengine side mounting plates\u003c\/a\u003e. Together you'll never have to worry about engine mounting issues again.\u003c\/p\u003e\n\u003cp\u003eFor more details and information on all of our drivetrain mounts \u003ca href=\"https:\/\/www.stinkyfab.com\/blogs\/news\/why-are-sfr-drivetrain-mounts-better\"\u003eCLICK HERE\u003c\/a\u003e to read our detailed article.   \u003c\/p\u003e\n\u003cp\u003eInstallation notes:\u003c\/p\u003e\n\u003cp\u003eOur mounts are designed to be direct replacements for the stock mounts, and install in much the same way. For start to finish installation instructions we suggest consulting your service manual. The only differences are as follows. \u003c\/p\u003e\n\u003cp\u003e1. On a small number of vehicles some minor trimming of the bushing shoulder is necessary due to Jeep not machining the stock bracket fully. This is not a problem on most models, or when using our engine plates. \u003c\/p\u003e\n\u003cp\u003e2. The best method for holding the inner bolt on the passenger side to tighten is shown below. Slide a short open end wrench under the bushing shell from the outside to hold the bolt, then tighten from underneath in the same manner as the stock mount. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0297\/8650\/5352\/files\/Install_480x480.jpg?v=1580361845\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eNOTE: Our SuperSoft Bushings are now Black instead of Red. See \u003ca href=\"https:\/\/www.stinkyfab.com\/blogs\/news\/new-color-same-bushings\"\u003eBlog Post\u003c\/a\u003e for details. \u003c\/p\u003e","brand":"StinkyFab","offers":[{"title":"Default Title","offer_id":31646862639240,"sku":"JMM","price":115.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0297\/8650\/5352\/products\/108_5351-r_1__46771.jpg?v=1578182634"},{"product_id":"sfr-heavy-duty-xj-mj-zj-track-bar-bracket","title":"SFR Heavy Duty XJ\/MJ\/ZJ Track Bar Bracket","description":"\u003cp\u003eThis is the upper track bar bracket that comes in our High Roller Steering \u0026amp; Brake kit and our Over the Knuckle Steering track bar kit. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThis bracket positions the pivot point slightly outward towards the tire to maximize track bar length. It has a 2\" joint mounting width and uses a 1\/2\" bolt to match with many aftermarket adjustable track bars. \u003c\/p\u003e\n\u003cp\u003eWe also offer a \u003ca href=\"https:\/\/www.stinkyfab.com\/collections\/xj-suspension\/products\/brace-for-sfr-xj-track-bar-bracket\"\u003eBrace\u003c\/a\u003e that ties into the opposite side frame rail to strengthen this common weak area on the XJ\/MJ.\u003c\/p\u003e","brand":"StinkyFab","offers":[{"title":"Default Title","offer_id":31646862934152,"sku":"XJTB","price":89.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0297\/8650\/5352\/products\/20211027_091040-R.jpg?v=1635354811"},{"product_id":"sfr-trail-proof-engine-mounting-plates-jeep-xj-87-01-yj-87-95-tj-97-99","title":"SFR Trail Proof Engine Mounting Plates -  Jeep XJ (87-01), YJ (87-95), TJ (97-99)","description":"\u003ch2\u003e\u003cspan style=\"color: rgb(128, 255, 0);\"\u003e\u003cstrong\u003e.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eIt's no secret that when used heavily off road the stock Jeep 4.0L motor mounts dont hold up very well.The stock engine side mounts only use 3 bolts to secure them, and they are quite close together which puts a lot of stress on the engine block. This design is fine for street duty, but when you start taking your Jeep off-road you can find that those bolts will pull out of the block, or worse yet the actual block will fail, leaving you stranded and in need of a replacement engine. Not a good scenario for sure.\u003c\/p\u003e\n\u003cp\u003eOur solution is simple. There are a number of unused holes in the sides of the engine block. Our new heavy duty mounts bolt into the stock location, as well as the surrounding bolt holes for extra strength and to spread the load over a larger area of the block. Our mounts can be used with the stock rubber engine isolator, but they were designed to be used with heavy duty isolators like the ones we build, or others as the stock rubber mounts dont tend to last long off-road either. These mounts were designed for serious abuse, in fact the very first set was specifically designed for the KOH TJ just before the 2010 King of the Hammers race. Needless to say that TJ has been through about as much abuse as any Jeep out there, and one thing we've never even had to think about is the engine mounts.  \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(128, 255, 0);\"\u003ePlease note: 1987-1990 XJ\/MJ models with Renix fuel injection have a knock sensor that will need to be relocated using an adapter bolt. Make sure to add that adapter from the pull down menu. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ffff00;\"\u003e Add a set of our \u003ca href=\"https:\/\/www.stinkyfab.com\/collections\/xj-drivetrain\/products\/sfr-trail-proof-motor-mounts-stock-height-jeep-4-0l\"\u003eMotor Mounts\u003c\/a\u003e and Save 10% with code \"MMBundle1\"*\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e***Hardware is included.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003cspan data-mce-fragment=\"1\"\u003e*may not be combined with other sale offers\u003c\/span\u003e\u003c\/p\u003e","brand":"StinkyFab","offers":[{"title":"No knock sensor adapter (+$0)","offer_id":47366780027116,"sku":"HO Plates","price":269.0,"currency_code":"USD","in_stock":true},{"title":"Add Renix knock sensor adapter (+$6.25)","offer_id":47366780059884,"sku":"RX Plates + adapter","price":275.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0297\/8650\/5352\/products\/108_5312-s__63432.jpg?v=1578182640"},{"product_id":"premium-1-ton-steering-kits-jeep-xj-mj-tj-zj","title":"7075 Aluminum 1-Ton Steering Kits, XJ\/ZJ\/TJ","description":"\u003ch2\u003e\u003cspan style=\"color: rgb(128, 255, 0);\"\u003e\u003cstrong\u003e.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eWe have taken the basic 1-Ton steering kit to the next level. Instead of doing the same old steel tie rod and drag link that everyone does we've gone with machined 7075 Solid Aluminum. This material has a lot of flexibility so when you run into a rock (and you will) it can flex and spring back to its original shape. Steel just bends and stays bent. \u003c\/p\u003e\n\u003ch3\u003e\u003cspan style=\"color: #80ff00;\"\u003e\u003ca href=\"https:\/\/www.stinkyfab.com\/pages\/1-ton-steering-faq\" style=\"color: #80ff00;\"\u003ePlease read our 1-Ton Steering FAQ for more details\u003c\/a\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cspan style=\"color: #80ff00;\"\u003e\u003cstrong\u003ePREMIUM 1-TON KITS\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003eWe believe in only supplying only the highest quality components. The other guys cut corners by supplying the cheapest Tie Rod Ends possible. We supply only the highest quality  TREs with our premium kits so that you can install it once and forget about it for a long long time. These kits come with a full lifetime warranty on both the aluminum links AND the tie rod ends.*  We also include our exclusive Roll Stop tie rod end boots to prevent tie rod roll and keep your steering tight. \u003c\/p\u003e\n\u003cp\u003e These kits are available as Under the Knuckle (UTK) with stock track bar setups, or Over the Knuckle (OTK) for those running more than 6\" of lift or who want more ground clearance. All use the same 1.5\" diameter 7075 Aluminum linkage, and include 4 new Tie rod ends. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ffff00;\"\u003eNOTE: Your Knuckles and Pitman arm will need to be re-tapered to fit the GM style 1-Ton TREs.\u003c\/span\u003e You can do this with the proper \u003ca href=\"https:\/\/stinkyfab.myshopify.com\/collections\/steering\/products\/reamer-for-1-ton-tie-rod-ends\"\u003etapered reamer\u003c\/a\u003e, or by using our machined pitman arm and \u003ca href=\"https:\/\/stinkyfab.myshopify.com\/collections\/steering\/products\/tapered-knuckle-inserts\"\u003etapered knuckle inserts\u003c\/a\u003e. For OTK installs you will need to move your trackbar up to match the drag link angle or you will get bumpsteer. We recommend using our \u003ca href=\"https:\/\/stinkyfab.myshopify.com\/collections\/steering\/products\/sfr-otk-track-bar-kit-for-jeep-xj-mj-zj\"\u003eOTK Track Bar Kit\u003c\/a\u003e. You will also need to remove or relocate the stock sway bar mounts as well as some other trimming and fitting for clearance as well as adjustment of steering stops.   Some heavy duty diff covers extend forward much farther than others and can cause interference with the tie rod. You may need to adjust your steering stops accordingly, or choose a cover that doesn't protrude as much. \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003ePlease allow 7-10 business days for processing.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e *see \u003ca href=\"https:\/\/www.stinkyfab.com\/pages\/shipping-returns\"\u003eshipping \u0026amp; returns\u003c\/a\u003e page for warranty details\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"StinkyFab","offers":[{"title":"Premium Under the Knuckle","offer_id":31870544937096,"sku":"P-UTK","price":529.0,"currency_code":"USD","in_stock":true},{"title":"Premium Over the Knuckle","offer_id":31870544969864,"sku":"P-OTK","price":529.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0297\/8650\/5352\/products\/DSC_0141-R__41805.jpg?v=1586720102"},{"product_id":"sfr-otk-track-bar-kit-for-jeep-xj-mj-zj","title":"SFR OTK Track Bar Kit for Jeep XJ\/MJ\/ZJ","description":"\u003ch3\u003e\u003cbr\u003e\u003c\/h3\u003e\n\u003cp\u003eSFR Over The Knuckle Track Bar Kit\u003c\/p\u003e\n\u003cp\u003eMoving your steering up over the knuckles can help get those vulnerable links up out of the rocks, and also improve drag link angles, but when you change that drag link angle you MUST move the track bar to match or undesirable bumpsteer will result.\u003c\/p\u003e\n\u003cp\u003eThis kit includes all the parts you will need to get things where they belong. This is also the kit you'll want to use if you're doing a WJ steering conversion like our High Roller Kit. We include both of our proven track bar mounts from our High Roller steering and brake kit, as well as a beefy 7075 Aluminum adjustable track bar. We use a Cromoly Heim joint at the frame end and a RockJock4x4 Johnny Joint at the axle. The axle bracket has several different hole locations so you can get your geometry just right. \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ffff00;\"\u003eNOTE: Installing this kit requires welding and removal of the stock track bar bracket. Welding is required.  Installation should be performed by a qualified professional only.   \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003eAny modification to your steering, brakes, or suspension will alter how your vehicle drives. Care must be taken to avoid loss of control or rollover of modified vehicles. SFR Products are sold for Off-Road vehicles. The driver of the vehicle is responsible for its safe operation and use. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePlease allow 7-10 business days for processing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003eUpdated 10-27-2021\u003c\/span\u003e\u003c\/p\u003e","brand":"StinkyFab","offers":[{"title":"Default Title","offer_id":31646863392904,"sku":"XJ-OTK-TB kit","price":385.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0297\/8650\/5352\/products\/20190307_120755-S__07867.jpg?v=1617033656"},{"product_id":"wj-swap-or-otk-track-bar","title":"WJ Swap or OTK Track Bar","description":"\u003cp\u003eSFR Over The Knuckle Track Bar This is the track bar from our High Roller and OTK Track bar kits. Includes the 7075 Aluminum Bar, 1 cromoly rod end with misalignment spacers, and Johnny joint. Does not include the upper and lower brackets or hardware. Please note, if you are not using our brackets your length may be slightly different, as well as the mounting bolt and bracket widths. \u003c\/p\u003e\n\u003cp\u003eAny modification to your steering, brakes, or suspension will alter how your vehicle drives. Care must be taken to avoid loss of control or rollover of modified vehicles. SFR Products are sold for Off-Road vehicles. The driver of the vehicle is responsible for its safe operation and use.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #404040;\"\u003eUpdated 10-31-2021\u003c\/span\u003e\u003c\/p\u003e","brand":"StinkyFab","offers":[{"title":"Default Title","offer_id":31646863556744,"sku":"TrackBar","price":249.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0297\/8650\/5352\/products\/100_0818-s__93991.jpg?v=1578182661"},{"product_id":"sfr-sway-bar-relocation-brackets-xj","title":"SFR Sway Bar Relocation Brackets XJ","description":"Moves Cherokee Sway Bar down and forward. These brackets move your stock sway bar down 1.75\" and forward 2.5\" to clear the steering components when doing a WJ steering conversion. These brackets also come with our High Roller Steering \u0026amp; Brake Kit and are designed to work together with our over the top sway bar brackets. Sold in Pairs","brand":"StinkyFab","offers":[{"title":"Default Title","offer_id":31646863589512,"sku":"SFR-XJ-SB Drop","price":60.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0297\/8650\/5352\/products\/108_4295-s__23089.jpg?v=1578182655"},{"product_id":"sfr-unit-bearing-spacers","title":"SFR Unit Bearing Spacers","description":"Bearing spacers for use with TJ Unit Bearings and WJ knuckles These weld in spacers are needed when using TJ unit bearings with WJ knuckles in order to properly align the u-joint with the ball joint pivot centerline. They also help with proper brake rotor alignment. Sold in Pairs.   Please note, these spacers must be welded in place and should only be installed by a qualified professional. We accept no resposiblity for failure to properly install. ","brand":"StinkyFab","offers":[{"title":"Default Title","offer_id":31646866866312,"sku":"Knuckle Spacer","price":39.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0297\/8650\/5352\/products\/108_4156-s__11935.jpg?v=1578182695"},{"product_id":"sfr-steering-stabilizer-bracket","title":"SFR Steering Stabilizer Bracket","description":"This is a universal steering stabilizer mounting bracket that clamps to 1.5\" diameter tie rod or drag link. This is the size used for all of our heavy duty steering kits. ","brand":"StinkyFab","offers":[{"title":"Default Title","offer_id":31646873387144,"sku":"SFR-StabTab","price":25.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0297\/8650\/5352\/products\/stabtab1__01155.jpg?v=1578182716"},{"product_id":"sfr-jeep-xj-cherokee-long-arm-brackets","title":"SFR Jeep XJ Cherokee Long Arm Brackets","description":"\u003cp\u003e\u003cspan style=\"color: #ffff00;\"\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThese brackets are designed with optimal suspension geometry and performance in mind. They are designed to be used as part of a 4 link setup, but can also be run as a 3 link with the upper on either side. Built from 3\/16\" steel throughout they are beefy enough for the most hardcore use. They are designed to be bolted on and come with all hardware, but also have slots and plug holes for a weld on attachment as well. These do not require replacement of the stock crossmember. Perfect for those already running a short arm lift kit wanting more articulation and wheel travel. The brackets are available by themselves, or combined with our 7075 suspension links in either a 4 or 3 link configuration. The 4 Link kit includes 4 machined 7075 Aluminum link arms with Currie Johnny Joints for the lowers, and a combination of Johnny Joints and our heavy duty clevis ends for the uppers. Our Clevis ends are designed to attach at the axle using stock JK control arm bushings. These are the same size bushing as the stock XJ, but with a larger ID sleeve for use with a 7\/16\" bolt instead of the tiny 10mm XJ bolts. The 3 Link Kit includes the same lower links as the 4-link kit, but a single upper with Johnny Joints on both ends. It also includes a new heavy duty weld on upper link mount for the passenger side of the axle.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE FOR THOSE WITH FRAME STIFFENERS:\u003c\/strong\u003e Our suspension brackets can be used with most frame stiffeners on the market, however some additional installation work will be required. During install you will need to trim the inner frame pinch seam extra to allow the brackets to shift outward the thickness of the stiffener. You will also need to make a shim to fill the gap between the floor and the bolt flanges on the brackets to compensate for the thickness of the stiffeners shifting the brackets down. If you have not yet installed frame stiffeners we recommend doing them after the bracket install as it is easier, but they can be installed either way.\u003c\/p\u003e","brand":"StinkyFab","offers":[{"title":"Default Title","offer_id":31646873518216,"sku":"XJLAB","price":675.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0297\/8650\/5352\/products\/20180114_193131-r__88614.jpg?v=1578182694"},{"product_id":"sfr-basic-wj-high-steer-big-brake-kit-xj","title":"SFR High Roller WJ Steering \u0026 Big Brake Kit for XJ\/MJ","description":"\u003ch2\u003e\u003cspan style=\"color: rgb(128, 255, 0);\"\u003e\u003cstrong\u003e.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eHigh Steer and Bigger brakes for your XJ Cherokee! \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e If you have lifted your Jeep you have probably already discovered the limitations of the stock steering and brakes. The steering is weak, the geometry isn't good, and it's vulnerable to being damaged by rocks on the trail. In addition when you put bigger tires on your brakes have to work harder, and the stock calipers and rotors just aren't up to the task. The best way to fix all of this is to convert to a WJ crossover style steering system, move the links up out of the rocks, and put on larger, more powerful brakes. Until now this has been a very challenging project, requiring a lot of research, measuring, as well as fabricating or modifying parts from several different places to get the geometry right. Usually this ends up becoming a lot of trial and error, time in the shop and money out of your pocket. We decided to change all that. This is our High Roller steering and brake kit. We supply all the fabricated specialty parts to make doing the job easier, as well as a full set of instructions to take you through the job step by step.\u003c\/p\u003e\n\u003cp\u003eWe do \u003cspan style=\"color: #ffff00;\"\u003eNOT\u003c\/span\u003e include any of the OEM replacement parts that you can source from your local parts house. This allows you to choose the quality, and price level you want to go with. Included in this package you will recieve:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDetailed installation instructions to guide you through step by step, including a detailed list of all OEM parts you will need to purchase.\u003c\/li\u003e\n\u003cli\u003e7075 Aluminum tie rod with offset tie rod ends\u003c\/li\u003e\n\u003cli\u003e7075 Aluminum Drag link with tie rod ends\u003c\/li\u003e\n\u003cli\u003e7075 Aluminum track bar with adjustable ends \u003c\/li\u003e\n\u003cli\u003eSFR Lower Track bar mount\u003c\/li\u003e\n\u003cli\u003eSFR Upper Track bar mount\u003c\/li\u003e\n\u003cli\u003eSFR Over the Top Sway Bar brackets\u003c\/li\u003e\n\u003cli\u003eSFR Sway Bar Relocation Brackets\u003c\/li\u003e\n\u003cli\u003eSFR Bearing Spacers\u003c\/li\u003e\n\u003cli\u003eSFR Plastic Brake Rotor Drilling Guide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eWe have done our best to take a very difficult and confusing project and make it simple and easy to install. This is still a very in depth conversion however, welding is required as is general mechanical knowledge as well as some minor machine work. \u003cspan style=\"color: #ffff00;\"\u003eInstallation should be done by qualified personnel only.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePlease note: This kit is intended for use with 17\" wheels. Many 16\" wheels will fit with proper backspacing but not all. 15\" wheels are not recommended. Extended length brake lines will be necessary for lifted vehicles that do not already have them installed.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003eAny modification to your steering, brakes, or suspension will alter how your vehicle drives. Care must be taken to avoid loss of control or rollover of modified vehicles. SFR Products are sold for Off-Road vehicles. The driver of the vehicle is responsible for its safe operation and use.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePlease allow 7-10 business days for processing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #404040;\"\u003eUpdated 10-9-2023\u003c\/span\u003e\u003c\/p\u003e","brand":"StinkyFab","offers":[{"title":"Default Title","offer_id":31646873583752,"sku":"SFR-WJ-Basic-Kit-XJ","price":985.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0297\/8650\/5352\/products\/108_4270-s_1__51870.jpg?v=1578182712"},{"product_id":"sfr-over-the-top-sway-bar-brackets","title":"SFR Over The Top Sway Bar Brackets","description":"\u003cp\u003eThese are the Sway bar brackets included in our High Roller Steering and Brake upgrade kit. They weld onto the axle tube and spring buckets and move the sway bar attachment up above the tie rod. You will need to use appropriate length sway bar links for your vehicle height, and since these move the attachment point up we recommend measuring before ordering sway bar links. These are intended to be used with our sway bar relocation brackets, or with a custom sway bar setup. If you are doing a WJ steering conversion we HIGHLY recommend also buying our relocation brackets for proper geometry. \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ffff00;\"\u003eSold in Pairs \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003ePlease note that this is a weld on product. If you do not have the skills and equipment to properly install yourself we highly recommend having it done by a professional.\u003c\/span\u003e\u003c\/p\u003e","brand":"StinkyFab","offers":[{"title":"Default Title","offer_id":31646873976968,"sku":"SFR D30Sway","price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0297\/8650\/5352\/products\/108_4244-s__05072.jpg?v=1578182699"},{"product_id":"sfr-raised-track-bar-bracket-axle-end","title":"SFR Raised Track Bar Bracket (axle end)","description":"Raised Track Bar Bracket for Jeep XJ, TJ, LJ, MJ Dana 30 front axleThis is the bracket that comes with our High Roller Steering \u0026amp; Brake kit. It uses a standard 2\" mounting width joint and has 4 holes sized for 1\/2\" bolts which can be drilled larger if desired. This bracket requires welding for assembly and installation. Designed to fit 2.5\" axle tube but can fit other sizes with a little modification.","brand":"StinkyFab","offers":[{"title":"Default Title","offer_id":31646875189384,"sku":"D30 TB","price":65.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0297\/8650\/5352\/products\/20210326_122622_268e06c2-a3e3-496e-b3ae-4f7f038ea1f7.jpg?v=1617033729"},{"product_id":"sfr-spring-bucket-supports-front-xj-tj-zj-lj","title":"SFR Spring Bucket Supports - Front XJ,TJ, ZJ, LJ","description":"\u003cp\u003eWeld on spring bucket reinforcement plates These plates box in the bottom of the stock spring buckets of your jeep front axle, adding strength and rigidity. Passenger side requires removal of stock trackbar and stabilizer brackets.   Please note, installation requires welding, cutting, and grinding. \u003c\/p\u003e","brand":"StinkyFab","offers":[{"title":"Default Title","offer_id":31646875418760,"sku":"SFR SpringBox","price":35.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0297\/8650\/5352\/products\/108_4184-s__29739.jpg?v=1578182727"},{"product_id":"sfr-supersoft-bushings","title":"SFR SuperSoft Bushings","description":"\u003cp\u003eOur exclusive SFR SuperSoft bushings. These are the bushings used in our Trail Proof Motor and Transmission Mounts. These bushings are significantly softer than the standard poly bushings most of our competitors use which makes them much better at absorbing engine vibrations. Like all bushings they are a wear item, so these are replacements, sold by themselves. \u003c\/p\u003e\n\u003cp\u003ePlease Note: As of April 2026 our SuperSoft Bushings are now Black instead of Red. See \u003ca href=\"https:\/\/www.stinkyfab.com\/blogs\/news\/new-color-same-bushings\"\u003eBlog Post\u003c\/a\u003e for details. \u003c\/p\u003e\n\u003cp\u003eSold in PAIRS. One pair is needed for each mount (a set of motor mounts requires 2 pairs)\u003c\/p\u003e","brand":"StinkyFab","offers":[{"title":"Default Title","offer_id":31646876205192,"sku":"SSB","price":10.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0297\/8650\/5352\/files\/SSB-Black.jpg?v=1776026286"},{"product_id":"trail-proof-crossmember-t-case-skid-jeep-xj-mj","title":"Trail Proof Crossmember \u0026 T-Case Skid - Jeep XJ\/MJ","description":"\u003cp\u003e\u003cspan style=\"color: #ffff00;\" mce-data-marked=\"1\"\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan style=\"color: rgb(128, 255, 0);\"\u003e\u003cstrong\u003e.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eConstructed from laser cut and CNC formed 3\/16\" steel this crossmember is designed to take a beating. Replaces the stock stamped sheetmetal crossmember in most Cherokee and Comanche models with the NP231 transfer case. This crossmember was also designed to work in conjunction with our long arm brackets for the ultimate in suspension and undercarriage upgrades. \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ffff00;\"\u003e\u003cstrong\u003eCombine with one of our \u003ca href=\"https:\/\/www.stinkyfab.com\/collections\/suspension\/products\/sfr-long-arm-kits-for-jeep-xj-cherokee\"\u003eLong Arm suspension kits\u003c\/a\u003e and get 10% off with code \"AddASkid\"*\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003eNOTE: Designed to fit with NP231 Transfer case models. Requires modification for NP242, do not purchase if you have a 242 and are not prepared to cut and weld. Does not fit Peugeot 5speed transmission models.    \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstall Notes:\u003c\/strong\u003e This crossmember was designed to be a direct replacement for the stock part, and mounts using all the existing hardware. There is one additional optional mounting point towards the rear of the skid. The hole there lines up with an existing hole in the frame. To use this hole you will need to install a rivnut or similar. On Cherokee models you will need to use a spacer between the skid and the bottom of the frame for this hole. Comanche models do not need this spacer as the frame is flat. If you've never installed a riv-nut before there are a bunch of \u003ca href=\"https:\/\/www.youtube.com\/results?search_query=how+to+install+rivet+nuts+without+tool\"\u003eYouTube videos\u003c\/a\u003e with different ways of doing it using basic tools.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e*may not be combined with other sale offers\u003c\/p\u003e","brand":"StinkyFab","offers":[{"title":"Default Title","offer_id":31646877221000,"sku":"XJXM","price":325.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0297\/8650\/5352\/products\/108_5652-R__51187.jpg?v=1578182723"},{"product_id":"jeep-upper-link-clevis-ends","title":"Jeep Upper link clevis ends","description":"\u003cp\u003eThese are the link ends we use for the upper attachment point on Jeep front axles using the stock style bushing. If you're building a custom suspension, or building your own links to go with our Long arm brackets these will make the job easier. They have a 1\"-14tpi right hand thread on the shank, and use a 7\/16\" bolt at the bushing.  There is a 5 degree angle built in to help align with the stock axle brackets.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003e\u003cspan style=\"color: #c6fa01;\"\u003eSOLD INDIVIDUALLY\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan style=\"color: #c6fa01;\"\u003eJam nut not included. \u003c\/span\u003e\u003c\/p\u003e","brand":"StinkyFab","offers":[{"title":"Default Title","offer_id":31646878400648,"sku":"Clevis Ends","price":65.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0297\/8650\/5352\/products\/20201117_125819.jpg?v=1605660731"},{"product_id":"jeep-aw4-transmission-skid-plate","title":"Jeep AW4 Transmission Skid Plate","description":"\u003ch2\u003e\u003cspan style=\"color: rgb(128, 255, 0);\"\u003e\u003cstrong\u003e.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eHeavy duty skid plate for your AW4 automatic transmission. Fits over the stock pan and includes hardware for a simple easy install. Made from 3\/16\" thick laser cut and CNC formed steel plate for ultimate strength and protection.\u003cbr\u003e\u003c\/p\u003e","brand":"StinkyFab","offers":[{"title":"Default Title","offer_id":31646879547528,"sku":"AW4Skid","price":105.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0297\/8650\/5352\/products\/AW4Skid2__98562.jpg?v=1578182748"},{"product_id":"axle-upper-link-bracket","title":"Axle Upper Link Bracket","description":"Weld on Upper Link bracket for axle end of link suspension.  Designed for 2.5\" diameter axle tube and has a 5* angle built in.","brand":"StinkyFab","offers":[{"title":"Default Title","offer_id":31646879678600,"sku":"XJLA Axle Mount","price":40.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0297\/8650\/5352\/products\/108_5580-S2__30403.jpg?v=1578182738"},{"product_id":"sfr-long-arm-kits-for-jeep-xj-cherokee","title":"SFR Long Arm Kits for Jeep XJ Cherokee","description":"\u003ch2\u003e\u003cspan style=\"color: rgb(128, 255, 0);\"\u003e\u003cstrong\u003e.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eOur Long Arm brackets are designed with optimal suspension geometry and performance in mind. They are designed to be used as part of a 4 link setup, but can also be run as a 3 link with the upper on either side. Built from 3\/16\" steel throughout they are beefy enough for the most hardcore use. They are designed to be bolted on and come with all hardware, but also have slots and plug holes for a weld on attachment as well. These do not require replacement of the stock crossmember. Perfect for those already running a short arm lift kit wanting more articulation and wheel travel. \u003cspan style=\"color: #ffff00;\"\u003eWe recommend at least 4\" of lift to allow adequate compression travel. \u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe brackets are available by themselves, or combined with our 7075 suspension links in either a 4 or 3 link configuration.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe 4 Link kit\u003c\/strong\u003e includes 4 machined 7075 Aluminum link arms with Currie Johnny Joints for the lowers, and a combination of Johnny Joints and our heavy duty clevis ends for the uppers. Our Clevis ends are designed to attach at the axle using stock JK control arm bushings. These are the same size bushing as the stock XJ, but with a larger ID sleeve for use with a 7\/16\" bolt instead of the tiny 10mm XJ bolts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe 3 Link Kit\u003c\/strong\u003e includes the same lower links as the 4-link kit, but only a single upper. It also includes a Johnny Joint style replacement for the OEM bushing that presses into the cast in mount on the drivers side of the stock axle. \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ffff00;\"\u003eNOTE FOR THOSE WITH FRAME STIFFENERS:\u003c\/span\u003e Our suspension brackets can be used with most frame stiffeners on the market, however some additional installation work will be required. During install you will need to trim the inner frame pinch seam extra to allow the brackets to shift outward the thickness of the stiffener. You will also need to make a shim to fill the gap between the floor and the bolt flanges on the brackets to compensate for the thickness of the stiffeners shifting the brackets down. If you have not yet installed frame stiffeners we recommend doing them after the bracket install as it is easier, but they can be installed either way. \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ffff00;\"\u003e\u003cstrong\u003eAdd our beefy \u003ca href=\"https:\/\/www.stinkyfab.com\/collections\/suspension\/products\/trail-proof-crossmember-t-case-skid-jeep-xj-mj\"\u003eCrossmember and T-case skid\u003c\/a\u003e with code \"AddASkid\" and save 10% off the skid plate price! *\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePlease allow 7-10 business days for processing.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e*may not be combined with other sale offers\u003c\/span\u003e\u003c\/p\u003e","brand":"StinkyFab","offers":[{"title":"3 Link","offer_id":31871076827272,"sku":"XJLA Kits-3","price":1475.0,"currency_code":"USD","in_stock":true},{"title":"4 Link","offer_id":31871076860040,"sku":"XJLA Kits-4","price":1675.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0297\/8650\/5352\/products\/108_5570-S__19609.jpg?v=1605660824"},{"product_id":"heavy-duty-stock-replacement-track-bar-bracket-xj-tj-zj","title":"Heavy Duty stock replacement Track Bar Bracket XJ, TJ, ZJ","description":"\u003cp\u003eThe stock track bar bracket on Jeep front axles is a constant source of problems. It's far too flimsy, being made from thin sheet metal. It's extremely common for the bolt holes in this bracket to become wallowed out, allowing the track bar to move around causing poor handling or death wobble. In addition there isn't much metal there to effectively perform a repair, and access to the nut on the back side is severely limited. It's nearly impossible to get a wrench in there. \u003c\/p\u003e\n\u003cp\u003eOur replacement bracket solves all of these problems and more. Made from thick 3\/16\" Steel plate you won't need to worry about it tearing or the holes wallowing out. It's much stronger than the original piece, while retaining the stock geometry. We also added a second hole 3\/4\" to the right of the standard hole to allow centering of the axle on lifted Jeeps that are still using the stock track bar. Finally, we designed this bracket with service in mind. We cut a window to the under side that is big enough for a wrench to slide in to hold the nut. This is the perfect repair piece for those experiencing these problems, and the best way to prevent the issues for those who haven't had them yet. \u003c\/p\u003e\n\u003cp\u003eHoles are the stock 10mm diameter for use with a stock trackbar, or they can be drilled larger to fit aftermarket trackbars using larger bolts. This bracket requires cutting and welding and should only be installed by qualified personnel. \u003cspan style=\"color: #ffff00;\"\u003e*bolt shown in pictures is for illustration purposes only, no hardware is included, only the actual bracket. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/gIe0IWpvja0\" height=\"315\" width=\"560\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" frameborder=\"0\"\u003e\u003c\/iframe\u003e \u003c\/p\u003e","brand":"StinkyFab","offers":[{"title":"Default Title","offer_id":31646879842440,"sku":"STB","price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0297\/8650\/5352\/products\/D30StockTB-1__59139_1024x1024_be2e0a96-f87a-4306-9b86-c903fe310784.jpg?v=1638312377"},{"product_id":"sfr-roll-stopper-tie-rod-end-boot","title":"SFR Roll Stopper Tie Rod End Boot","description":"\u003cp\u003e\u003cspan style=\"color: #ffff00;\"\u003eSOLD INDIVIDUALLY \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eWe designed these Tie Rod End Boot Bushings specifically for the popular Inverted T design steering systems, such as our Premium 1-Ton kits, to help alleviate the tendency for tie rod roll. We designed these bushings to fit the MOOG ends we use our 1-ton steering kits but they fit other brands of TRE as well.  They are made out of a very dense polyurethane material, unlike competitors who are using harder materials which cause binding and premature wear to the tie rod ends. Our bushings have just enough give for the movement you need, but prevent the movement you don't. They also have an integrated grease boot to keep dirt and water out, and grease in.   \u003c\/p\u003e\n\u003cp\u003e*Not for use with high angle TRE's (ES2027L \u0026amp; ES2026R)\u003c\/p\u003e","brand":"StinkyFab","offers":[{"title":"Default Title","offer_id":31646879875208,"sku":"TRE Boot","price":14.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0297\/8650\/5352\/products\/20190629_095325-R__21151.jpg?v=1578182738"},{"product_id":"pitman-arms-tapered-for-1-ton-steering","title":"Pitman Arms Tapered for 1 Ton Steering","description":"\u003cp\u003eThese are standard length Pitman arms that have been machined to fit the large taper GM 1-ton Tie rod ends we use in our heavy duty steering kits (ES2027L or ES2026R). If you've ever tried to drill out a pitman arm before you'll already know what a pain it is. It's a forged piece and very hard to drill or taper. This one takes all the work out of the job for you!\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ffff00;\"\u003eNOTE: We do not sell drop pitman arms. They are virtually never needed regardless of lift height and we do not recommend them for most applications. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ffff00;\"\u003e*90 Day Manufacturers Warranty. \u003c\/span\u003e\u003c\/p\u003e","brand":"StinkyFab","offers":[{"title":"XJ Cherokee","offer_id":33572892672136,"sku":"XJP","price":110.0,"currency_code":"USD","in_stock":true},{"title":"ZJ Grand Cherokee","offer_id":33572892704904,"sku":"ZJP","price":110.0,"currency_code":"USD","in_stock":true},{"title":"TJ Wrangler","offer_id":33572892737672,"sku":"TJP","price":110.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0297\/8650\/5352\/products\/Pitman.jpg?v=1589929304"},{"product_id":"brace-for-sfr-xj-track-bar-bracket","title":"Brace for SFR XJ Track Bar Bracket","description":"\u003ch3\u003e\u003cbr\u003e\u003c\/h3\u003e\n\u003cp\u003eThis brace ties our XJ track bar bracket into the passenger side frame rail, helping to spread the load through both sides of the frame. This brace works with all SFR Track bar brackets for the Jeep XJ, and MJ.\u003c\/p\u003e","brand":"StinkyFab","offers":[{"title":"Default Title","offer_id":33957871026312,"sku":"TBB","price":89.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0297\/8650\/5352\/products\/TBB4.jpg?v=1592069557"},{"product_id":"sfr-jeep-shackles","title":"SFR Jeep Shackles","description":"\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eHeavy duty suspension shackles. Formed from 1\/4\" steel. Shackles measure 5.5\" or 6.5\" between holes. Will add approximately 1.5-2.5\" of lift on XJ models. Designed to work with all common lift springs including Deavers. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ffff00;\"\u003e*shackles come unpainted*\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003eAny modification to your steering, brakes, or suspension will alter how your vehicle drives. Care must be taken to avoid loss of control or rollover of modified vehicles. SFR Products are sold for Off-Road vehicles. The driver of the vehicle is responsible for its safe operation and use.\u003c\/span\u003e\u003c\/p\u003e","brand":"StinkyFab","offers":[{"title":"Default Title","offer_id":34418635374757,"sku":"Shackles","price":140.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0297\/8650\/5352\/products\/20230202_105055.jpg?v=1675365025"},{"product_id":"sfr-xj-shackle-relocation-brackets","title":"SFR XJ Shackle Relocation Brackets","description":"\u003ch3\u003e.\u003c\/h3\u003e\n\u003cp\u003eHeavy Duty No Lift Shackle Relocation Brackets for Jeep XJ Cherokee. These enable you to adjust shackle angle for optimum performance when using re-arched lift springs. Constructed from 1\/4\" steel, these brackets mount using the 4 trailer hitch attachment bolts, as well as 4 additional bolts through the floor and rear bulkhead. \u003cspan style=\"color: #ffff00;\"\u003eSOLD AS A PAIR\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eMost XJ's come with the trailer hitch nutplates already installed from the factory, but if yours does not you will need to purchase them. We recommend \u003ca href=\"https:\/\/smile.amazon.com\/Crown-Automotive-52001174K-Tank-Reinforcement\/dp\/B00BYNWWWG\/ref=sr_1_2?dchild=1\u0026amp;keywords=52001174K\u0026amp;qid=1589919557\u0026amp;sr=8-2\"\u003eCrown Automotive PN 52001174K\u003c\/a\u003e \u003c\/p\u003e\n\u003cp\u003eThese can be used with stock shackles, however we do not normally recommend it. Because of the short length of those shackles adjustment will be very limited. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ffff00;\"\u003e*requires removal of stock shackle box, this is a permanent modification.*\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ffff00;\"\u003ePLEASE NOTE: We supply 9\/16\" shackle hardware. Some other manufacturers use 14mm which is slightly smaller and may require use of a 14mm bolt. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/gU1Z9rleVFA\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003eAny modification to your steering, brakes, or suspension will alter how your vehicle drives. Care must be taken to avoid loss of control or rollover of modified vehicles. SFR Products are sold for Off-Road vehicles. The driver of the vehicle is responsible for its safe operation and use.\u003c\/span\u003e\u003c\/p\u003e","brand":"StinkyFab","offers":[{"title":"Default Title","offer_id":34418668830885,"sku":"SRB","price":160.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0297\/8650\/5352\/products\/SRB3_cc4db418-b5cd-4c02-ac2d-80fe35696e6b.jpg?v=1592069708"},{"product_id":"trail-proof-upper-control-arm-bracket-for-jeeps","title":"Trail Proof Upper Control Arm Bracket for Jeeps","description":"The passenger side upper control arm bracket on most Jeep front axles is a common point of failure. It's stamped from a very thin sheet of metal and when used off-road this bracket frequently crumples or rips off of the axle entirely. Our replacement bracket is CNC cut and formed from 3\/16\" thick steel and is fully boxed for strength. Simply cut off the flimsy old bracket and weld this one in its place. Designed to accept the stock press in bushings, or can be slightly modified to weld in a 2\" Johnny Joint.","brand":"StinkyFab","offers":[{"title":"Default Title","offer_id":37461310865573,"sku":"UCA","price":40.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0297\/8650\/5352\/products\/20201104_080642-R.jpg?v=1608230061"},{"product_id":"1-ton-steering-replacement-tie-rod-end-set","title":"1-Ton Steering replacement tie rod end set.","description":"All 4 tie rod ends from our premium 1-Ton steering kits. Contains one ES2233L either OTK or UTK, one ES2027L, and two ES2234R ends.","brand":"MOOG","offers":[{"title":"Under the Knuckle","offer_id":39697686659237,"sku":"1Ton Ends UTK","price":259.0,"currency_code":"USD","in_stock":true},{"title":"Over the Knuckle","offer_id":39697695735973,"sku":"1Ton Ends OTK","price":259.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0297\/8650\/5352\/products\/20210423_110225.jpg?v=1619201009"},{"product_id":"sfr-heavy-duty-tj-lj-track-bar-bracket","title":"SFR Heavy Duty TJ\/LJ Track Bar Bracket","description":"\u003cp\u003eThis is the upper track bar bracket that comes in our High Roller Steering \u0026amp; Brake kit and our Over the Knuckle Steering track bar kit. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThis bracket positions the pivot point slightly outward towards the tire to maximize track bar length. It has a 2\" joint mounting width and uses a 1\/2\" bolt to match with many aftermarket adjustable track bars. \u003c\/p\u003e","brand":"StinkyFab","offers":[{"title":"Default Title","offer_id":39897229099173,"sku":"TJTB","price":89.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0297\/8650\/5352\/products\/TJTB-4.jpg?v=1621043677"},{"product_id":"sfr-otk-track-bar-kit-for-jeep-tj-lj","title":"SFR OTK Track Bar Kit for Jeep TJ\/LJ","description":"\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eSFR Over The Knuckle Track Bar Kit\u003c\/p\u003e\n\u003cp\u003eMoving your steering up over the knuckles can help get those vulnerable links up out of the rocks, and also improve drag link angles, but when you change that drag link angle you MUST move the track bar to match or undesirable bumpsteer will result.\u003c\/p\u003e\n\u003cp\u003eThis kit includes all the parts you will need to get things where they belong. This is also the kit you'll want to use if you're doing a WJ steering conversion like our High Roller Kit. We include both of our proven track bar mounts from our High Roller steering and brake kit, as well as a beefy 7075 Aluminum adjustable track bar. We use a Cromoly Heim joint at the frame end and a RockJock4x4 Johnny Joint at the axle. The axle bracket has several different hole locations so you can get your geometry just right. \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ffff00;\"\u003eNOTE: Installing this kit requires welding and removal of the stock track bar bracket from the axle. Welding is required.  Installation should be performed by a qualified professional only.   \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003eAny modification to your steering, brakes, or suspension will alter how your vehicle drives. Care must be taken to avoid loss of control or rollover of modified vehicles. SFR Products are sold for Off-Road vehicles. The driver of the vehicle is responsible for its safe operation and use. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePlease allow 7-10 business days for processing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003eUpdated 10-27-2021\u003c\/span\u003e\u003c\/p\u003e\n\u003ch6\u003e\u003cbr\u003e\u003c\/h6\u003e","brand":"StinkyFab","offers":[{"title":"Default Title","offer_id":39897265406117,"sku":"TJ TB Kit","price":385.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0297\/8650\/5352\/products\/TJTB-5.jpg?v=1621044225"},{"product_id":"copy-of-sfr-high-roller-wj-steering-big-brake-kit-for-xj-mj","title":"SFR High Roller WJ Steering \u0026 Big Brake Kit for TJ\/LJ","description":"\u003ch2\u003e\u003cspan style=\"color: rgb(128, 255, 0);\"\u003e\u003cstrong\u003e.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eHigh Steer and Bigger brakes for your TJ Wrangler! \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e If you have lifted your Jeep you have probably already discovered the limitations of the stock steering and brakes. The steering is weak, the geometry isn't good, and it's vulnerable to being damaged by rocks on the trail. In addition when you put bigger tires on your brakes have to work harder, and the stock calipers and rotors just aren't up to the task. The best way to fix all of this is to convert to a WJ crossover style steering system, move the links up out of the rocks, and put on larger, more powerful brakes. Until now this has been a very challenging project, requiring a lot of research, measuring, as well as fabricating or modifying parts from several different places to get the geometry right. Usually this ends up becoming a lot of trial and error, time in the shop and money out of your pocket. We decided to change all that. This is our High Roller steering and brake kit. We supply all the fabricated specialty parts to make doing the job easier, as well as a full set of instructions to take you through the job step by step.\u003c\/p\u003e\n\u003cp\u003eWe do \u003cspan style=\"color: #ffff00;\"\u003eNOT\u003c\/span\u003e include any of the OEM replacement parts that you can source from your local parts house. This allows you to choose the quality, and price level you want to go with. Included in this package you will recieve:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDetailed installation instructions to guide you through step by step, including a detailed list of all OEM parts you will need to purchase.\u003c\/li\u003e\n\u003cli\u003e7075 Aluminum tie rod with offset tie rod ends\u003c\/li\u003e\n\u003cli\u003e7075 Aluminum Drag link with tie rod ends\u003c\/li\u003e\n\u003cli\u003e7075 Aluminum track bar with adjustable ends \u003c\/li\u003e\n\u003cli\u003eSFR Lower Track bar mount\u003c\/li\u003e\n\u003cli\u003eSFR Upper Track bar mount\u003c\/li\u003e\n\u003cli\u003eSFR Over the Top Sway Bar brackets\u003c\/li\u003e\n\u003cli\u003eSFR Bearing Spacers\u003c\/li\u003e\n\u003cli\u003eSFR Plastic Brake Rotor Drilling Template. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eWe have done our best to take a very difficult and confusing project and make it simple and easy to install. This is still a very in depth conversion however, welding is required as is general mechanical knowledge as well as some minor machine work. \u003cspan style=\"color: #ffff00;\"\u003eInstallation should be done by qualified personnel only.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePlease note: This kit is intended for use with 17\" wheels. Many 16\" wheels will fit with proper backspacing but not all. 15\" wheels are not recommended. Extended length brake lines will be necessary for lifted vehicles that do not already have them installed.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003eAny modification to your steering, brakes, or suspension will alter how your vehicle drives. Care must be taken to avoid loss of control or rollover of modified vehicles. SFR Products are sold for Off-Road vehicles. The driver of the vehicle is responsible for its safe operation and use.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePlease allow 7-10 business days for processing.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eNote: Some photos are an XJ. TJ steering system is very similar. \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #404040;\"\u003eUpdated 10-9-2023\u003c\/span\u003e\u003c\/p\u003e","brand":"StinkyFab","offers":[{"title":"Default Title","offer_id":39897275826341,"sku":"TJ High Roller","price":985.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0297\/8650\/5352\/products\/jumping-dustin-s.jpg?v=1621561538"},{"product_id":"weld-on-shock-mounts","title":"Weld On Shock Mounts","description":"\u003cp\u003eWe designed these low profile weld on shock mounts specifically for the XJ, but they are universal enough to be used on just about anything. A common problem when doing an SYE in conjunction with a suspension lift is that the rear pinion needs to be rotated upwards, and with the stock shock mounts you end up with one shock being compressed more than the other. Until now the best option was to custom make new mounts, as all the commonly available brackets place the shock mount much too high and leave you with either very short shocks, or no up travel. \u003c\/p\u003e\n\u003cp\u003eThese mounts are higher than the stock location for ground clearance, but not so much that you are sacrificing the ability to use a long travel shock. The bolt hole measures 2.25\" below the axle centerline. Sold as a pair. \u003c\/p\u003e\n\u003ch3\u003e\u003cspan style=\"color: #ffff00;\"\u003e***WELDING REQUIRED***\u003c\/span\u003e\u003c\/h3\u003e","brand":"StinkyFab","offers":[{"title":"Default Title","offer_id":39937767473317,"sku":"RSK","price":53.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0297\/8650\/5352\/products\/20210521_160351-R.jpg?v=1621983150"},{"product_id":"xj-tj-zj-front-axle-swap-brackets","title":"XJ, TJ, ZJ Front Axle Swap Bracket Kit","description":"\u003cp\u003eDesigned specifically for swapping a JK front axle into your XJ, TJ or ZJ, these brackets replicate the factory coil, lower control arm and shock mounts in a much heavier duty fashion. The lower control arm mounts are made from 1\/4\" steel plate, and the rest is 3\/16\" thick. These brackets make swapping a JK or other front axle into your older Jeep a breeze. These brackets locate the coils in the original position forward of the axle tube, but provisions have also been made for moving the coil back for wheelbase stretches or other custom setups. \u003c\/p\u003e\n\u003cp\u003eWe also offer a Steering Kit for the JK axle swap, as well as OTA track bar kits for the \u003ca href=\"https:\/\/www.stinkyfab.com\/collections\/xj-suspension\/products\/sfr-otk-track-bar-kit-for-jeep-xj-mj-zj\"\u003eXJ\/ZJ\u003c\/a\u003e and \u003ca href=\"https:\/\/www.stinkyfab.com\/collections\/jeep-tj-lj-wrangler\/products\/sfr-otk-track-bar-kit-for-jeep-tj-lj\"\u003eTJ\/LJ\u003c\/a\u003e and our \u003ca href=\"https:\/\/www.stinkyfab.com\/collections\/jeep-tj-lj-wrangler\/products\/trail-proof-upper-control-arm-bracket-for-jeeps\"\u003eHD Upper Control Arm Bracket\u003c\/a\u003e to complete the setup. If you're planning to run a different axle using more stock style steering and track bar, our \u003ca href=\"https:\/\/www.stinkyfab.com\/collections\/xj-suspension\/products\/heavy-duty-stock-replacement-track-bar-bracket-xj-tj-zj\"\u003eHD Stock Replacement Track bar mount\u003c\/a\u003e will also work well. If you plan to run a sway bar our \u003ca href=\"https:\/\/www.stinkyfab.com\/collections\/xj-suspension\/products\/sfr-over-the-top-sway-bar-brackets\"\u003eOver the Top sway bar brackets\u003c\/a\u003e may also interest you. \u003c\/p\u003e\n\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/nWLQ69Na9Uw\" height=\"315\" width=\"560\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" frameborder=\"0\"\u003e\u003c\/iframe\u003e","brand":"StinkyFab","offers":[{"title":"Default Title","offer_id":41979379351788,"sku":"XJK Brackets","price":195.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0297\/8650\/5352\/products\/20211001_092658.jpg?v=1635911792"},{"product_id":"front-lower-control-arm-brackets-for-xj-tj-zj","title":"Front Lower Control Arm Brackets for XJ, TJ, ZJ","description":"\u003cp\u003eHas one of your flimsy stock control arm brackets ripped off your front axle, or are you just waiting for it to happen and leave you stranded? Fix the problem for once and for all with our heavy duty brackets. Formed from 1\/4\" thick steel plate, they can take a beating and keep on going.\u003c\/p\u003e\n\u003cp\u003eSold as a pair. \u003c\/p\u003e","brand":"StinkyFab","offers":[{"title":"Default Title","offer_id":41979417100524,"sku":"LCA","price":49.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0297\/8650\/5352\/products\/20211105_170505.jpg?v=1636257660"},{"product_id":"xjk-axle-swap-trail-proof-steering-kit","title":"XJK Axle Swap Trail Proof Steering Kit","description":"\u003ch2\u003e\u003cspan style=\"color: rgb(128, 255, 0);\"\u003e\u003cstrong\u003e.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eIf you're looking at swapping a JK front axle into your XJ, TJ or ZJ this is the ultimate steering solution. This kit includes our 7075 Aluminum JK Tie Rod, as well as a matching drag link designed specifically for swapping a JK front axle into older coil sprung Jeeps. \u003c\/p\u003e\n\u003cp\u003eThis is a solid 1.5\" diameter aluminum tie rod and drag link, with 7\/8-18 threads and includes offset 1-ton Tie Rod ends on the tie rod and at the knuckle end of the drag link. The pitman arm end uses a high angle GM 1-ton end. One end of each link is right hand threaded and the other is left hand thread to make alignment simple. The drag link is designed to mount over the knuckle and requires drilling the steering arm out to 7\/8\" and installing the included tapered insert. \u003c\/p\u003e\n\u003cp\u003eThe TRE used at the pitman uses the large GM taper, which will require you to ream your pitman arm or replace it with one of our machined arms. You will also need 17\" wheels with at least 3.75\" backspace. May not fit all factory wheels, check wheel\/tire fitment prior to installation.  \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003eThese are custom made to order. Please allow 7-10 business days for processing.\u003c\/span\u003e  \u003c\/p\u003e\n\u003cp\u003eIf you're curious just how much abuse 7075 Aluminum can take, this real world testing video should set your mind at ease.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/056Ibn--_lw\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"StinkyFab","offers":[{"title":"Default Title","offer_id":41979429617900,"sku":"XJK Steering","price":579.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0297\/8650\/5352\/products\/257802388_4516331408486886_3642448534228408267_n.jpg?v=1643048954"},{"product_id":"replacement-bushings-for-sfr-shackles","title":"Replacement Bushings for SFR Shackles","description":"Replacement bushings for our leaf spring shackles. Sold as a set of 4, to replace bushings in one pair of shackles.","brand":"Barnes","offers":[{"title":"Default Title","offer_id":42769067114732,"sku":"","price":20.0,"currency_code":"USD","in_stock":true}]},{"product_id":"1-14-jam-nut-rh","title":"1\"-14 Jam Nut RH","description":"Right Hand thread Jam nut for use with our clevis link end or Johnny Joints.","brand":"StinkyFab","offers":[{"title":"Default Title","offer_id":43474225103084,"sku":"","price":4.89,"currency_code":"USD","in_stock":true}]},{"product_id":"1-14-jam-nut-lh","title":"1\"-14 Jam Nut LH","description":"Left Hand thread Jam nut for use with our clevis link end or Johnny Joints.","brand":"StinkyFab","offers":[{"title":"Default Title","offer_id":43474225234156,"sku":"","price":4.89,"currency_code":"USD","in_stock":true}]},{"product_id":"jeep-drag-links","title":"Jeep Drag Links, COMPLETE","description":"\u003cp\u003eThis is the drag link only from our \u003ca href=\"https:\/\/www.stinkyfab.com\/collections\/steering\/products\/premium-1-ton-steering-kits-jeep-xj-mj-tj-zj\"\u003e1-Ton Steering kits\u003c\/a\u003e, \u003ca href=\"https:\/\/www.stinkyfab.com\/collections\/steering\/products\/sfr-basic-wj-high-steer-big-brake-kit-xj\"\u003eHigh Roller Steering kits\u003c\/a\u003e, \u003ca href=\"https:\/\/www.stinkyfab.com\/collections\/jeep-jk-wrangler\/products\/jeep-jk-wrangler-trail-proof-steering-kit\"\u003eJK Trail Proof Steering Kit\u003c\/a\u003e or \u003ca href=\"https:\/\/www.stinkyfab.com\/collections\/xjk-axle-swap\/products\/xjk-axle-swap-trail-proof-steering-kit\"\u003eXJK Axle swap steering kit.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eIncludes the Aluminum Drag link, and 2 tie rod ends. \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003eThese are custom made to order. Please allow 7-10 business days for processing.\u003c\/span\u003e  \u003c\/p\u003e\n\u003cp\u003eIf you're curious just how much abuse 7075 Aluminum can take, this real world testing video should set your mind at ease.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/056Ibn--_lw\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"StinkyFab","offers":[{"title":"JK UTK Drag Link","offer_id":43632622108908,"sku":"","price":325.0,"currency_code":"USD","in_stock":true},{"title":"JK OTK Drag Link","offer_id":43632622141676,"sku":"","price":325.0,"currency_code":"USD","in_stock":true},{"title":"XJK Axle swap Drag link","offer_id":43687098974444,"sku":"","price":325.0,"currency_code":"USD","in_stock":true},{"title":"1-ton or High Roller WJ swap Drag Link","offer_id":47153675436268,"sku":null,"price":325.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0297\/8650\/5352\/products\/108_5480-r__44197_a5f1a8f7-3db6-4276-8dc4-4338ddf1466e.jpg?v=1674753995"},{"product_id":"copy-of-xj-tj-zj-front-axle-swap-brackets","title":"XJ, TJ, ZJ Axle Swap Coil Mounts","description":"\u003cp\u003e\u003cspan style=\"color: #ffff00;\"\u003e\u003cstrong\u003eTHIS ITEM IS THE COIL MOUNTS ONLY. Lower control arm mounts and shock mounts are not included. If you want everything together you'll want our \u003ca href=\"https:\/\/www.stinkyfab.com\/collections\/xjk-axle-swap\/products\/xj-tj-zj-front-axle-swap-brackets\" style=\"color: #ffff00;\"\u003eAxle Swap Bracket Kit\u003c\/a\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eDesigned specifically for swapping a JK front axle into your XJ, TJ or ZJ, these brackets replicate the factory coil, lower control arm and shock mounts in a much heavier duty fashion. These brackets make swapping a JK or other front axle into your older Jeep a breeze. These brackets locate the coils in the original position forward of the axle tube, but provisions have also been made for moving the coil back for wheelbase stretches or other custom setups. They can also be used in custom rear axle setups as well\u003c\/p\u003e\n\u003cp\u003eWe also offer a Steering Kit for the JK axle swap, as well as OTA track bar kits for the \u003ca href=\"https:\/\/www.stinkyfab.com\/collections\/xj-suspension\/products\/sfr-otk-track-bar-kit-for-jeep-xj-mj-zj\"\u003eXJ\/ZJ\u003c\/a\u003e and \u003ca href=\"https:\/\/www.stinkyfab.com\/collections\/jeep-tj-lj-wrangler\/products\/sfr-otk-track-bar-kit-for-jeep-tj-lj\"\u003eTJ\/LJ\u003c\/a\u003e and our \u003ca href=\"https:\/\/www.stinkyfab.com\/collections\/jeep-tj-lj-wrangler\/products\/trail-proof-upper-control-arm-bracket-for-jeeps\"\u003eHD Upper Control Arm Bracket\u003c\/a\u003e to complete the setup. If you're planning to run a different axle using more stock style steering and track bar, our \u003ca href=\"https:\/\/www.stinkyfab.com\/collections\/xj-suspension\/products\/heavy-duty-stock-replacement-track-bar-bracket-xj-tj-zj\"\u003eHD Stock Replacement Track bar mount\u003c\/a\u003e will also work well. If you plan to run a sway bar our \u003ca href=\"https:\/\/www.stinkyfab.com\/collections\/xj-suspension\/products\/sfr-over-the-top-sway-bar-brackets\"\u003eOver the Top sway bar brackets\u003c\/a\u003e may also interest you. \u003c\/p\u003e\n\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/nWLQ69Na9Uw\" title=\"YouTube video player\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e","brand":"StinkyFab","offers":[{"title":"Default Title","offer_id":43635839926508,"sku":"Coil Buckets","price":149.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0297\/8650\/5352\/products\/Capture.jpg?v=1674931567"},{"product_id":"wj-swap-7075-aluminum-tie-rod","title":"WJ Swap 7075 Aluminum Tie Rod","description":"Tie Rod for WJ steering swap. If you're doing the WJ Steering and brake swap on your XJ, TJ, or ZJ and simply need the Tie Rod to complete your steering, this is what you need. This kit includes ONLY the Tie Rod made from solid machined 7075 Aluminum, and 2 offset GM 1-Ton Tie Rod ends for the tie rod.  These is the same tie rod we include in our High Roller Steering \u0026amp; Brake Kit. Please note: This kit is intended for use with 17\" wheels. Some 16\" wheels may fit with proper backspacing. 15\" wheels are not recommended.","brand":"StinkyFab","offers":[{"title":"Default Title","offer_id":43687100973292,"sku":"WJ TieRod","price":325.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0297\/8650\/5352\/products\/108_4803-r_1__04778_4568541b-af6f-40fd-97d5-4281fd4e0009.jpg?v=1677608173"},{"product_id":"replacement-tie-rod-end","title":"Replacement Tie Rod End","description":"\u003cp\u003eThis is for ONE replacement tie rod end for any of our steering kits, excluding the reamed ES2233L ends used on the passenger side of our 1-ton Jeep kits. Those can be found listed separately. \u003c\/p\u003e\n\u003cp\u003ePlease specify which joint and from which kit you're looking for. Include thread direction if possible. \u003c\/p\u003e","brand":"StinkyFab","offers":[{"title":"Default Title","offer_id":44066236170476,"sku":"","price":39.0,"currency_code":"USD","in_stock":true}]},{"product_id":"replacement-offset-tie-rod-ends","title":"Replacement Offset Tie Rod Ends","description":"One pair of offset tie rod ends. One right, one left. These are the ends used on our JK Tie rod, XJK axle swap steering, and High Roller WJ swap steering.","brand":"Barnes","offers":[{"title":"Default Title","offer_id":44414913282284,"sku":"","price":78.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0297\/8650\/5352\/files\/Offset-Ends.jpg?v=1708280577"},{"product_id":"wj-brake-rotor-drilling-guide-copy","title":"WJ brake rotor drilling guide (Plastic)","description":"\u003cp\u003eThis is the drill guide we provide with our High Roller high steer \u0026amp; big brake kit.  This makes it quick and easy to accurately drill a set of WJ front brake rotors with the XJ\/TJ 5x4.5 lug pattern. You simply bolt this plate through the existing holes, then drill your pilot holes through the 1\/4\" guide holes. Remove the template and enlarge with a 5\/8\" bit and you're done.\u003c\/p\u003e\n\u003cp\u003eLess expensive and lighter weight than our old metal version, these do the same job at a much lower price! NOTE: Color may vary. \u003c\/p\u003e","brand":"StinkyFab","offers":[{"title":"Default Title","offer_id":45172029456620,"sku":"Drill Guide Plastic","price":20.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0297\/8650\/5352\/files\/20240524-105723.jpg?v=1716573607"},{"product_id":"3-4-16-jam-nut-lh","title":"3\/4-16 Jam Nut LH","description":"\u003cp\u003eLeft Hand thread Jam nut for use with our track bar kit. \u003c\/p\u003e","brand":"StinkyFab","offers":[{"title":"Default Title","offer_id":45770578198764,"sku":null,"price":4.89,"currency_code":"USD","in_stock":true}]},{"product_id":"3-4-16-jam-nut-rh","title":"3\/4-16 Jam Nut RH","description":"\u003cp\u003eRight Hand thread Jam nut for use with our track bar kits\u003c\/p\u003e","brand":"StinkyFab","offers":[{"title":"Default Title","offer_id":45770578624748,"sku":null,"price":4.89,"currency_code":"USD","in_stock":true}]},{"product_id":"high-roller-wj-swap-replacement-tie-rod-end-set","title":"High Roller WJ Swap replacement tie rod end set.","description":"\u003cp\u003eAll 4 tie rod ends from our High Roller WJ Knuckle swap steering kits. Contains 2 offset tie rod ends for the tie rod, and 2 straight ends for the drag link. \u003c\/p\u003e\n\u003cp\u003eNOTE: Our current kit uses one long and one short end as shown with a 25\" long aluminum drag link. The kits sold before October 2023 used a shorter drag link with 2 long tie rod ends. If your kit has a shorter drag link with the longer tie rod ends, please let us know. \u003c\/p\u003e","brand":"MOOG","offers":[{"title":"Default Title","offer_id":47318250094828,"sku":"WJ TREs","price":229.0,"currency_code":"USD","in_stock":true}]}],"url":"https:\/\/www.stinkyfab.com\/collections\/jeep-xj-cherokee-parts\/steering.oembed?page=2","provider":"StinkyFab","version":"1.0","type":"link"}