If you're looking at swapping a JK front axle into your XJ, TJ or ZJ this is the ultimate steering solution. This kit includes our 7075 Aluminum JK Tie Rod, as well as a matching drag link designed specifically for swapping a JK front axle into older coil sprung Jeeps.
This is a solid 1.5" diameter aluminum tie rod and drag link, with 7/8-18 threads and includes offset 1-ton Tie Rod ends on the tie rod and at the knuckle end of the drag link. The pitman arm end uses a high angle GM 1-ton end. One end of each link is right hand threaded and the other is left hand thread to make alignment simple. The drag link is designed to mount over the knuckle and requires drilling the steering arm out to 7/8" and installing the included tapered insert.
The TRE used at the pitman uses the large GM taper, which will require you to ream your pitman arm or replace it with one of our machined arms. You will also need 17" wheels with at least 3.75" backspace. May not fit all factory wheels, check wheel/tire fitment prior to installation.
These are custom made to order. Please allow 7-10 business days for processing.
If you're curious just how much abuse 7075 Aluminum can take, this real world testing video should set your mind at ease.